10-19-2021 07:35 PM
Has anyone used this Powershell module to create IP address and Address groups? I require assistance on this.
10-20-2021 12:50 PM
What exact issue are you running into, and have you actually read the docs? The docs for power alto has examples under Set-PaAddress and Set-PaAddressGroup that actually detail exactly how you would go about doing this. https://poweralto.com/
If you are hung up on something specific then please let us know so that we can assist with that particular issue, but PowerAlto is pretty well documented.
10-20-2021 10:03 AM
Please see our guide on this here.
10-20-2021 12:50 PM
What exact issue are you running into, and have you actually read the docs? The docs for power alto has examples under Set-PaAddress and Set-PaAddressGroup that actually detail exactly how you would go about doing this. https://poweralto.com/
If you are hung up on something specific then please let us know so that we can assist with that particular issue, but PowerAlto is pretty well documented.
11-22-2021 07:55 PM
I have resolved the issue. Thank you so much for the response.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
