- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-09-2016 11:05 AM
I cam across a scenario where we need to migrate a virtual system from a PA device to another . devices are the same model . Is there any suggestions ? what is the best approach to this ?
Also , if a PA device is running virtual systems how we can add it to cluster ? what happens to VSystems ? do they automatically replicated to the other node ?
02-09-2016 03:46 PM - edited 02-09-2016 04:25 PM
> Using cli commands like "load config partial" you can select the config from one vsys and tell where you want to place the content.
https://www.paloaltonetworks.com/documentation/70/
02-09-2016 04:20 PM - edited 02-09-2016 04:23 PM
-If a PA device is running virtual systems and you need to add it to a cluster, all devices must have multi vsys capabilities enabled. Device>Setup>Management>Multi Virtual System Capability
-And yes, VSYS configuration is automatically replicated as long as you have Config Sync enabled.
-Can you provide more details about the scenario?
02-09-2016 03:46 PM - edited 02-09-2016 04:25 PM
> Using cli commands like "load config partial" you can select the config from one vsys and tell where you want to place the content.
https://www.paloaltonetworks.com/documentation/70/
02-09-2016 04:20 PM - edited 02-09-2016 04:23 PM
-If a PA device is running virtual systems and you need to add it to a cluster, all devices must have multi vsys capabilities enabled. Device>Setup>Management>Multi Virtual System Capability
-And yes, VSYS configuration is automatically replicated as long as you have Config Sync enabled.
-Can you provide more details about the scenario?
02-16-2016 07:44 AM
Thank you very much .
what are important things while transfering VSYS from one device to another ? I didn't find any standard guidelines . I understand the part that we can partially import the configuration but there are some shared objects and other dependencies . any suggestions will be greatly appreciated.
02-27-2016 04:48 PM - edited 02-27-2016 04:53 PM
What about migrating shared objects and profiles first before migrating the VSYS?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!