VM-100 serie firewall in AH mode on vmware Hyper-Converged VxRail.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

VM-100 serie firewall in AH mode on vmware Hyper-Converged VxRail.

L0 Member

Hello Team,

 

I am going to deployed the VM-100 serie firewall in AH mode on vmware  Hyper-Converged  VxRail ( with esxi).

The VM-100 series  will bee used to protect the servers deployed on the VxRail.

What are the requirements needed for the deployement of the WM-100 on the vmware  Hyper-Converged  VxRail ?

cans somone please sugested a senario of a deployement ?

 

I am thinking to deploy the wm-series in virtual wire mode.

 

Thanks in advance.

 

Zanga

1 REPLY 1

L7 Applicator

The deployment model is not different for hyper converged versus standard vsphere deployments.  The two main modes are deploying a vm series per host or a vm series per virtual network on the host.  These are described here in the documentation.

 

https://www.paloaltonetworks.com/documentation/80/virtualization/virtualization/set-up-a-vm-series-f...

 

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 2190 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!