VPN error message after upgrading PAN-OS to 10.1.10-h2

[Dhirajjagdale]

Hi,

After upgrading to firewall PANOS version to 10.1.10-h2 i started seeing below error message logs under monitor > system logs. On the previous PAN-OS version this error was not observed.

However, in reality tunnel is up & running, only thing on system logs it shows up & down. After disabling the tunnel monitoring, tunnel up-down logs stop showing under system log.

But i need to enable the tunnel monitoring again because i need to monitor the VPN status and want to know if there is any alternating solution to stop the tunnel up-down logs with tunnel monitoring on.

Regards,
Dhiraj

[Claw4609]

Hello,

While this is not listed in the known issues of 10.1.10, it is listed in the addressed issues of 10.1.11:

So out of curiosity would these conditions apply to your environment?

PAN-OS 10.1.11 Addressed Issues (paloaltonetworks.com)