VPN Tunnel Management

Showing results for 
Show  only  | Search instead for 
Did you mean: 

VPN Tunnel Management

L0 Member

I would love to see an easy way to enable and disable ipsec tunnels and / or individual proxy ID's within the ipsec tunnel in order to force the tunnel to renegotiate via the GUI interface.  Why does such a basic function not exist on the PA in the gui?



L0 Member

If you have access to the CLI, I believe the following commands will do the same thing:

clear vpn ipsec-sa tunnel <value>

clear vpn ike-sa gateway <value>


L4 Transporter

Just for the sake of searching the forums and finding this thread in the future, I think this is the equivalent to Cisco's ASA commands:

clear crypto isakmp sa (or 'clear cry isa sa')

clear crypto ipsec sa

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!