Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-19-2017 12:39 AM
hey
hey
we have some problem with old system that are beeign stuck after some tome it is working and on the logs we see the session end reason is "tcp-reuse" my questions are:
1) what should be happaning on the network flow for this end-reason log to apear
2) will the FW generate some traffic to the client and server to "close" their existing connection?
thanks
03-20-2017 05:07 PM
#1 tcp-reuse means when the session finished the 3 or 4 ways FIN, and closing down the session (TCP Time Wait), during the TCP time wait, the same client and server is starting up a new session but using the same source and destination port as the session that just closed and couting down. That is when you will get the tcp-reuse.
A session is reused and the firewall closes the previous session.
See the sesssion about TCP Half Closed nad TCP Time Wait Timers.
#2 FW usually does not generate traffics to either side, unless you instructed it to.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
