05-02-2018 05:21 PM - edited 05-02-2018 05:22 PM
Hi All,
i having 1 application claim that their port is stuck on Syn send status and there is possibility causing by palo alto firewall. i did check on the traffic log .. it showing session end with tcp resue. i not sure is that tcp-reuse will causing the port hang?if yes any way we able to tune it?
one of our application port 2020 is stuck on syn sent stage... while doing nestat.
While we check on the Palo Alto traffic log it show session end with TCP-reuse
05-03-2018 05:42 AM
tcp-reuse means that a session is reused and the firewall closes the previously open session. Is the server hosting your application currently setup to allow tcp_tw_reuse while in time_wait?
05-03-2018 06:17 AM - edited 05-03-2018 06:26 AM
Hi BPry,
Thanks for reply. i had check with my server team. yes the application is allow tcp_tw_reuse. if with this configuration is that possibility palo alto will cause their server port stuck on sync sent status?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
