10-26-2011 07:32 AM
If I traceroute with the source ip of my private internal interface to the host that my user-id app is located it works.
If I just do a traceroute host to the host that my user-id is located on it fails.
I put a static host route in the VR pointing out my private internal interface and it still fails if I don't source the interface in the trace.
10-26-2011 07:45 AM
Hi
By default the traceroute and ping (w/o the source definition) commands reference the management interface. You do need to specify the interface source IP in that command to refer to a particular interface otherwise the management interface is implied.
This is expected behavior
This does not mean that the management interface participates in routing.
Hope this helps
10-26-2011 07:45 AM
Hi
By default the traceroute and ping (w/o the source definition) commands reference the management interface. You do need to specify the interface source IP in that command to refer to a particular interface otherwise the management interface is implied.
This is expected behavior
This does not mean that the management interface participates in routing.
Hope this helps
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
