01-06-2017 10:42 PM
Hi,
Next-VR: to forward traffic to a destination that is not in the local VR but another VR Used often when dealing with Multiple VSYS scenario, where each VSYS has its own VR.
01-07-2017 06:48 AM - edited 01-07-2017 06:48 AM
@TranceforLife is right, it's only meant to be used in a multivsys enviroment. Once you have multiple VSYS there are plenty of reasons that you would want to route traffic to another VSYS.
If you only utilize a single VSYS then you still might have it broken up so different buildings have their own VR; but usually if you were going that route then it's easier to just make the building it's own VSYS.
01-08-2017 11:05 PM
It's useful for scenario with IPSEC redundancy on FW with mutliple ISPs. Set a VR for each ISP and one for local networks. And then use intra VR routing for traffic between them.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
