Parsing GlobalProtect gateway multi user configs failure

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Parsing GlobalProtect gateway multi user configs failure

L0 Member

I have different purpose (new certificate with different CN) to create a new/parallel portal&gateway (to keep the change transparent for end user/and to keep easy revert back possibilities in worst case), so when i try to create a new por+gw by adding new pub-IP on same internet interface, using new certificate, using new client iP pool range,  i get below error while pushing the policy,

. SSLVPN: Invalid IPv4 pool value: xxxxxxxxxxxxxxxxxxx
. (Module: rasmgr)
. SSLVPN: failed to parse IP pool in tunnel xxxxxxxxxxx
. (Module: rasmgr)
. Parsing GlobalProtect gateway multi user configs failure
. (Module: rasmgr)
. Commit failed

I checked multiple times that there is no overlapping of client subnet that i am using, and subnet value is also perfect, its large enough, tried with /24, /22, but still not sure why its giving above error. 

Is it possible to configure two portal/gateway on same interface but with two different pub IPs and different tunnel interface and different client IP ranges ? 

 

0 REPLIES 0
  • 1657 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!