Intermittent Browser-Based RDP Session Failure Through Load Balancer – DPA_CREATE_TUNNEL_TARGET_UNREACHABLE

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Intermittent Browser-Based RDP Session Failure Through Load Balancer – DPA_CREATE_TUNNEL_TARGET_UNREACHABLE

L2 Linker

Hi Team,

 

We are experiencing an intermittent issue with HTML5-based sessions in CyberArk Privilege Cloud.

Issue Description:

  • When the PSM server is configured at the platform level to point directly to any individual PSM server, HTML5-based sessions work as expected.
  • When the PSM server is configured at the platform level to point to the load balancer FQDN, HTML5-based sessions work intermittently. Approximately half of the session attempts succeed, while the other half fail without any configuration changes.
  • However, sessions launched using the standard RDP client through the same load-balanced configuration work consistently without any issues.
  • The issue occurs when launching sessions through the browser, regardless of the application being accessed.

Error Details:

During failed HTML5-based session attempts, session diagnostics report the following error:

  • Status: Failure – DPA_CREATE_TUNNEL_TARGET_UNREACHABLE
  • Target: Load balancer FQDN
  • Target port: 3389

We have also verified connectivity to the load balancer FQDN over port 3389, and the connectivity test was successful.

Questions:

  1. What could cause HTML5-based sessions to fail intermittently when the platform is configured to use the load balancer, while sessions work consistently when pointing directly to individual PSM servers?
  2. What logs or troubleshooting steps would you recommend to identify the root cause?

 

Has anyone experienced a similar issue with CyberArk Privilege Cloud, where HTML5-based sessions fail intermittently through a load balancer while standard RDP client sessions continue to work consistently?

 

Any suggestions or guidance would be greatly appreciated.

 

Thank you.

2 REPLIES 2

L5 Sessionator

Hi. I think there is some configuration discrepancy. DPA_***** these kind of errors are related to SIA solution. But you mention that PSM session doesn't work. I think that would be the best way to start the investigation probably some of users launch their sessions using SIA + HTML5.

In ISPSS, HTML5GW leverages SIA to establish sessions to PSM servers instead of the typical Self-Hosted HTML5GW components you may be familiar with.

 

More than likely a Support case would be required to validate the specific errors in the backend logs. But based on my experience, if this is intermittent - it commonly points to a TLS validation issue on the cert leveraged.

 

Try temporarily disabling TLS Validation (temporarily only for testing) in Setup > Settings > Secure Infrastructure Access > TLS Validation. If that resolves the issue, most likely one of the PSMs has a cert and/or cert/binding issue that isn't being strictly enforced when using PSM-RDP without HTML5GW.

 

  • 28 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!