- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
04-06-2026 03:30 AM
Hi everyone,
I need advice, so basically In my lab environment:
Basically when I tried to register Machine, and "TEST" the manually input' credential, it shows this error. (tried both TLS enabled and disabled)
Lab status:
Also I'm not sure which IP does that belong to (the green marker redacted IP), all my environment uses 192.168.x.x, but it shows 10.x.x.x.
Is there anything I misconfigured here?
Thanks in advance 👍.
04-06-2026 02:31 PM
Hi @Briamt Briamt
I think there is a problem with the DNS resolution.
You can try this command inside your Vsatellite (ssh)
nslookup [website dns].lab.local
If the returned IP is the 10.x.x.x address (not your IIS server's 192.168.x.x IP), you have a DNS configuration issue.
The VSatellite might have a local entry mapping the hostname to the wrong IP. Run:
cat /etc/hosts | grep lab.local
If you see an entry with the 10.x.x.x IP, either:
Remove or correct the entry, OR
Add the correct mapping: 192.168.x.x [websitedns].lab.local
let me know!
04-06-2026 10:50 PM
Hi @Andrea Tepore ,
nslookup results is my [website dns].lab.local
/etc/hosts is already set to 192.168.x.x [website dns].lab.local as well
No entry with 10.x.x.x at all on the hosts file
Thanks
04-07-2026 12:17 AM
Configure winrm over https and try again on port 5986.
winrm quickconfig -transport:https
If you receive error pointing to the missing certificate, you'll need to upload manually signed certificate for that target together with the private key, the certificate needs to have Server Authentication.
04-07-2026 11:19 PM
is your VSatellite running inside a Docker container?
04-29-2026 12:26 AM
Hi @Briamt Briamt
Several community members have shared answers to your question. Could you let us know if any of these resolved your issue?
If so, please mark the appropriate answer as “Select as Best” to help other members find the solution easily.
If the issue remains unresolved, I recommend submitting a ticket with our support team for further assistance.
Thank you,
Shaked
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

