09-06-2023 03:32 AM
Hello,
I have existing eBGP connection between 2 routers, layer3 connectivity is done with vlan going customer side and with /30 IP address they are peering.
My question is that if i pass this BGP peering on Palo-Alto firewall with Virtual-Wire interfaces. Will I be able to see the prefix customer side of peer announcing or will I only see the traffic originating from peering IP address.
09-06-2023 07:54 PM
Hello @Memmed
thanks for posting.
You should be able to see prefixes advertised by customer. As long as BGP peer is established and there is no prefix filter in place vwire should not play any role in terms of how prefixes are advertised and received.
Kind Regards
Pavel
09-06-2023 07:54 PM
Hello @Memmed
thanks for posting.
You should be able to see prefixes advertised by customer. As long as BGP peer is established and there is no prefix filter in place vwire should not play any role in terms of how prefixes are advertised and received.
Kind Regards
Pavel
09-06-2023 09:16 PM
@PavelK Thank you for the insight. Appreciate.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
