Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Check logs for large number of IP Addresses

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Check logs for large number of IP Addresses

L2 Linker

I received a list of over 600 IP addresses associated with a botnet from a reliable threat intelligence source. I would like to check our logs for traffic to or from these addresses but creating a filter with that many IP addresses seems unwieldy. Does anyone know a better way?

1 accepted solution

Accepted Solutions

L2 Linker

After trying a few different methods, I used Excel formulas to create a traffic log filter with all 600 addresses. I used the filter directly in the UI and it ran in less than three minutes. Not as unwieldy as I had imagined.

View solution in original post

7 REPLIES 7

L2 Linker

You can export the logs to a CSV format and use local search.

By default it exports 2,000 rows but you can change it.

Export Logs (paloaltonetworks.com)

Cyber Elite
Cyber Elite

Hi @SSargent_ICTWA ,

 

The PANW free product MineMeld was build to easily incorporate threat intelligence feeds into the firewall.  https://www.paloaltonetworks.com/products/secure-the-network/subscriptions/minemeld

 

If your 600 IP addresses can be pulled from a simple HTML list off the Internet, you could create an EDL directly to it without having to use MineMeld.  https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/policy/use-an-external-dynamic-list-in-po...

 

Once you have the EDL configured (directly or from MineMeld) you can do a lot more:

  1. Automatically block the traffic.
  2. Generate reports on IP addresses that hit the block rule.
  3. Eliminate a lot of manual work in threat hunting your botnets!

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

@murali438 Thanks for that suggestion. I hadn't thought of that, and I gave it a try. Unfortunately, 1 million records are only enough to get a snapshot of a couple of hours on our network. I need to search all the logs that the firewall has at once. This may help me in other ways, though, so I appreciate the idea.

@TomYoung This is a good suggestion. I do have some EDL's configured. In this case, the threat intelligence came in a CSV file attached to an email. I put MineMeld on my roadmap, though, for future testing and possible implementation. It's just a little more involved than justified for this occasional intelligence source.

Cyber Elite
Cyber Elite

Hi @SSargent_ICTWA ,

 

You are correct.  Minemeld is involved.  If you have an internal web server, it may be easier to convert the CSV to a simple HTML page and point an EDL to it.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

L2 Linker

After trying a few different methods, I used Excel formulas to create a traffic log filter with all 600 addresses. I used the filter directly in the UI and it ran in less than three minutes. Not as unwieldy as I had imagined.

As a follow up to the suggestion about Minemeld... that's a minefield. Palo Alto "open sourced" it for the developer community to support over a year ago, and it has not received developer community support as far as I can tell. There are no longer any prebuilt Minemeld VM's as promised on the page that is linked in a previous comment. Because it is not supported, the Minemeld codebase is now dependent on outdated, vulnerable Linux components. What a disappointment.

 

In the meantime, Palo Alto is eager to sell us a single Cortex license for over $100,000 to supposedly fill this need (without the artificial limitations of the community edition).

 

I just need automated TI EDL's. Neither of these solutions are satisfactory.

  • 1 accepted solution
  • 3023 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!