03-06-2025 09:56 PM
Hello all,
I'm new to the Palo Alto firewalls and pardon me for my bad English as I'm not a native English speaker.
I'm trying to build the below network we currently have in my workplace in an eve-ng lab.
I'm not able to access the GUI through the address of eth 0/0 HQ_ISP address (203.189.70.2) with my current config. I have configured a Management profile with http, https, ping, ssh and assigned it to the eth 1/1 of the Palo. I have configured port forwarding on the HQ_ISP router like this ip nat inside source static 172.31.0.10 203.189.70.2
Windows host is able to ping 203.189.70.2 address and I have configured the NAT on HQ_ISP and BR_1_ISP routers translating internal 172.31.0.0/24 and 172.31.1.0/24 network to the public address of HQ_ISP and BR_1_ISP routers.
Please tell me where I've gone wrong. Any help would be greatly appreciated. Thanks a lot.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
