Decryption exception issue - no SNI - SCN: chat.signal.org

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Decryption exception issue - no SNI - SCN: chat.signal.org

L1 Bithead

Hi,

how to add following decryption error (ssl-forward-proxy) to exceptions?

 

- logs->decryption: dest address: ac88393aca5853df7.awsglobalaccelerator.com (shodan solves this ip /13.248.212.111/ also to service.signal.org; SNI - no value; SCN: chat.signal.org; error: General TLS protocol error

JarerkZajac_0-1655994017023.png

JarerkZajac_3-1655994196320.png

 

- logs->traffic: destination like above; decrypted: no; app: ssl; session end reason: decrypt-cert-validation; action: allow; type: end

JarerkZajac_1-1655994083091.png

 

What I have done:

- device->cert management->SSL decrypt exclusion: chat.signal.org and *.signal.org -> exclude from decryption

JarerkZajac_2-1655994143220.png

 

Other (almost all) exceptions work fine, but only this cert has no value for SNI (Server Name Indication).

JarerkZajac_7-1655994370894.png

 

1 accepted solution

Accepted Solutions

Hi @JarerkZajac ,

You can create Decryption rule, matching by destination address and using FQDN object with action set to "no decrypt"

View solution in original post

2 REPLIES 2

Hi @JarerkZajac ,

You can create Decryption rule, matching by destination address and using FQDN object with action set to "no decrypt"

Hi Astardzhiev,

thank you for answer and apologise for late reply. I solved this problem by adding FQDN to URL custom category and using it in decryption rule as no decrypt url category.

Chat.signal works fine, but lately another: signal messenger started the same -> no SNI, no SCN (subject common name), at the same IP/FQDN address. So I added new decrypt rule and added this address.

 

Thank you again for reply and solution.

 

Best

 

Jarek

 

  • 1 accepted solution
  • 2788 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!