HA traffic failover not wotking.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

HA traffic failover not wotking.

L1 Bithead

ArunKumar7_0-1708965333841.png

This is my HA configuration, PC 1 is 10.0.0.10 and PC2 is 30.0.0.15, I have configured HA active-passive.
HA is formed between Both Palo Alto but Failover is not working.

When I do failover the Passive becomes active however it is not responding for the ping from PC1 or From Pc2, I am doing continous ping from Pc1 to pc2. What I noticed is Palo is not responding to the ARP request generated by the PCs.

Please help to resolve this.

 

1 REPLY 1

Cyber Elite
Cyber Elite

what does your configuration look like? are your uplinks connected to the same aggregate interfaces on the palo and are you using LACP (or are you using 2 individual interfaces, and how would those be configured?)

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 501 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!