IKE phase-1 negotiation is failed as initiator, aggressive mode.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

IKE phase-1 negotiation is failed as initiator, aggressive mode.

L0 Member

Hi All,

We are facing an issue where IKE phase-1 negotiation has failed as the initiator in aggressive mode. The SA (Security Association) has failed between 199.X.X.X [500] and 162.X.X.X [500], with the cookie: fa14dad50518163e:0000000000. Can someone else please assist me in resolving this?

1 REPLY 1

Cyber Elite
Cyber Elite

to troubleshoot phase1 it's ideal if you have access to the logs of the receiving end, as the initiator will have very minimal logging available

if you can't access the remote side, see if they are able to initiate a connection so you can see which part in the negotiation fails

most likely it's a problem with the ID or the available cipher pairs between the two peers

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 2043 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!