PA-440 is showing to Panorama and won't allow removal

Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA-440 is showing to Panorama and won't allow removal

L0 Member

Currently have a PA 440 acting if it's still talking to a panorama server which it should not have ever have, I think it may have been due to an issue when I bought last year new. I'm not sure I've attached screenshots for suggestions complaining about merge size etc. I don't have Panorama. I am a very small office. 

PAN1.pngScreenshot 2024-06-19 at 5.15.03 PM.png


Cyber Elite
Cyber Elite


Your screenshot of the Panorama Settings would indicate that you have servers configured on this device. You'll want to follow to actually get everything cleared out and turned off properly. Make sure you actually take the backup as it specifies.

Thank you for the article, interestingly enough, the box has never been in panorama. I don't have a instance personally of it even. 

Cyber Elite
Cyber Elite

This is actually normal, it does not mean your firewall is managed by panorama. It just displays the total size of your configuration after merging all potential individual configs, in between parenthesis ( ) are examples


below is my config:

my local config is 214k, the predefined is 17mn, combined they are 18mb




Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 3 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!