PA-450 shutdown not working and device get rebooted after sometime .

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA-450 shutdown not working and device get rebooted after sometime .

L0 Member

Hello

 

 

I have issued the "request shutdown system" to our PA-450, but we didn't unplug the power immediately.

After 10 minutes, the system get rebooted.

 

Base on the KB(How to Perform a Graceful Shutdown ), the system should be in halted state, in order to boot the system again, we must unplug the power and plug the power back.

 

Is this a known issue? Our PA-450 is on 11.0.2-h2

1 REPLY 1

L2 Linker

Hello @AndyLiao ,

 

Thank you for your question regarding the PA-450.

 

To check if this is a known issue, can you please collect the CLI output, a TSF, and mention these same steps and open up a TAC case? Our support team can check if there have been any similar reported issues or check with our engineering to see if this is a previously reported issue or if this is new. 

 

 

 

Customer Success Engineer, NGFW
  • 784 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!