schedule for rule policy not on time

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

schedule for rule policy not on time

L0 Member

Hello

 

I set up a schedule for exist rule policy to be enable from 9:00 to 20:00. But I see there is traffic logs at 23.49, it does not terminate session at 20:00.

How to configure it to be enable only until 20:00 ?

 

Thank you

2 REPLIES 2

L1 Bithead

Hy @KmdCyber 

 

Hope you are doing well.

 

First you need to go to Objects => Schedule and click on add button and enter the detail as shown below and click ok.

WaqasAhmedMir_0-1671010023164.png

 

Now go to the Policies => Security and select the policy that you want to schedule. Open that policy and go to action tab and apply the schedule.

 

make sure you configure the NTP on your firewall.

 

L7 Applicator

Schedule will not kill long running sessions.

All it does it will not allow to create new sessions outside permitted time frame.

Enterprise Architect, Security @ Cloud Carib Ltd
ACE, PCNSE, PCNSI
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!