Cannot access to Safes from PrivateArk

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Cannot access to Safes from PrivateArk

L2 Linker

Hello experts,

I ran a 10.8 installation for the vault.

I performed the hardening steps and I ran the installation, I provided the information to connect to the vault from a remote location (I specified the CPM IP) and I specified twice a password.

I didn't defined yet any LDAP, so I just used as authentication method "PrivateArk Authentication".

At least in theory, everything should be fine: from the CPM I see that I can connect on the Vault server on port 1858, I launch the PrivateArk using the default username "Administrator", but I get the error ITATS528E (code -66), and the same happen with the PrivateArk client that I installed on the Vault.

I installed everything twice because I was scared that I originally entered bad the password, but the problem should be somewhere else. I also tried using: Administrator, administrator, ADMINISTRATOR, admin, etc, but nothing is working.

Now I get the error ITATS433E, IP address suspended for User Administrator.

What should I do to have it working?

Thanks

1 accepted solution

Accepted Solutions

I found:

I used administrator as login and I entered the operator password as password.

I don't know if this is the best approach, but it's now working!

Thanks for the assistance

View solution in original post

14 REPLIES 14

L7 Applicator

Your administrator account is suspended for multiple wrong authentication. You will have to enable it before you login with it. Do you have any other locally created cyberark account that has permission to unlock administrator account?If not you will have to login with master

Are you sure you are providing right admin password?

 

L6 Presenter

code -66 is actually incorrect password furnished or authentication failure, now you need to unlock either with equivalent user or ultimately 'Master'

Thanks,

L4 Transporter

code -66 is actually incorrect password furnished or authentication failure, now you need to unlock either with equivalent user or ultimately 'Master'

Thanks,

Hello, yes, I know that the account has been locked for multiple authentication and yes, I'm sure about the password because I'm just testing the installation so I provided twice (in two different installations) the same basic password, that is accepted during the installation process, but after is not accepted when I try to login using the PrivateArk client.

I also tried to login from the PrivateArk client, and from the Vault server, using "Master" + the password provided for the master, but also in this case it's not working.

I tried to login from the PrivateArk as Master, but the password I'm entering is not recognized. I can confirm you that it's not due to a different keyboard layout or capslock or other stuffs.

Strange.

Check this but this KB is related to password length

https://community.cyberark.com/s/article/00004932

I get the -66 when I connect from the CPM machine, I don't understand why occurs this problem, but it should not happen when I connect from the Vault machine.

Is it correct to setup "PrivateArk Authentication" in the PrivateArk client?

Is there any network restrictions or time restrictions applied on the account ? If yes try to disable it

https://cyberarkdocu.azurewebsites.net/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PASIMP/Trusted-Network-Areas.htm?Highlight=authorized%20area

No restrictions at all, I just did a basic installation and I'm connecting from the Vault to the Vault, so no network issues at all.

I opened the PrivateArk, I entered Master as login and the password that I typed twice during the installation process. I get this error: ITATS431E - Authentication failure for User Master. Error reading Private Recovery key.

Do you have any idea at this point? Thanks

Have you specified correct path for recprv.key. Check this

https://community.cyberark.com/s/article/00002518

I uninstalled and re-installed the Vault server. Before that I copied all license and key files in a folder.

I used as Master password a really basic combination, just to be sure to avoid problems.

I started the server and I get the message "Server 10.8 .. is up".

I opened again the PrivateArk client.

I see my Vault, I double click on it, I put Master as username and the password that I generated and I get:

ITATS430E - Authentication failure for User Master. Verify that the Master key is in the server computer.

I don't know what else I should do and where could it be the problem.

Please assist!

I found:

I used administrator as login and I entered the operator password as password.

I don't know if this is the best approach, but it's now working!

Thanks for the assistance

L6 Presenter

💪

  • 1 accepted solution
  • 1279 Views
  • 14 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!