- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
03-29-2020 11:21 PM
hi Mates,
I am testing CPM account reconciliation in v11.1. Assuming when account verification or password change is failed, the reconciliation would be automatically triggered.
I have set "RCAutomaticReconcileWhenUnsynched" = Yes at Platform level.
However, this doesn't happen at all. When CPM fails to change the password, it simply disables password, and reconcile is never triggered.
2:12:59 PM PasswordManager
CPM Change Password Failed | Address: 164.155.8.148, User Name: PSMConnect
ImmediateTask
Failure Description: Error in changepass to user 164.155.8.148\PSMConnect on domain 164.155.8.148(\\164.155.8.148).(winRc=5) Access is denied
CPM
2:12:59 PM PasswordManager
CPM Disable Password | Address: 164.155.8.148, User Name: PSMConnect
UnrecoverableError
Failure Description: Error in changepass to user 164.155.8.148\PSMConnect on domain 164.155.8.148(\\164.155.8.148).(winRc=5) Access is denied
CPM
what shall I do to make recon occur right after password change fails?
03-30-2020 01:20 AM
Follow your point, I finally found there is another parameter UnrecoverableErrors on the platform defines on which error code CPM stops to react. And 2121 is there by default.
So after I removed 2121 from UnrecoverableErrors and add it to RCReconcileReasons, the reconciliation starts to work after the max failed attempts.
Thanks in advance.👍
03-30-2020 12:27 AM
Have you tried manually reconciliation? Try once if its getting successful
and also check if the reconcile account has necessary permissions like switch, uname, whoami etc.
For changepass to user please check, group policy... Refer the article
03-30-2020 12:44 AM
I tried, either assigning a recon account to the account or defining a recon account on platform can recon the account with no issue.
03-30-2020 12:47 AM
Hi @Phil Yu Reconciliation will not be triggered at all times. It will happen only if the CPM plug-in error code for the failure is present in the parameter "RCReconcileReasons" in the platform.
03-30-2020 12:48 AM
Have you checked yourself that reconcile account has necessary permissions?? also check the above mentioned article and then try again.. I think it will resolve...
03-30-2020 01:03 AM
That's a good point. I reviewed the CPM third party log as below:
Assuming the error code is 2121 or 5, I added both to RCReconcileReasons
Recycled both CPM policy service and password manager service, the error is still the same 😟
03-30-2020 01:06 AM
i thought i attached screenshot, not sure why they were missing. The error code in CPM log is Windows RC [5]. CPM RC [2121].
03-30-2020 01:12 AM
win RC =5 is the windows error code and 2121 is the CPM error code.
Could you able to verify the password successfully?
03-30-2020 01:20 AM
Follow your point, I finally found there is another parameter UnrecoverableErrors on the platform defines on which error code CPM stops to react. And 2121 is there by default.
So after I removed 2121 from UnrecoverableErrors and add it to RCReconcileReasons, the reconciliation starts to work after the max failed attempts.
Thanks in advance.👍
03-30-2020 01:23 AM
Reconciliation triggers when verification fails, here you might have triggered password change, which after trying 5 times(default), will disable the password object.
You are trying to change the password of 'PSMConnect' which is believe, is on Domain.
The errors encountered are because of Windows or domain properties, is that the case?
03-30-2020 01:23 AM
Reconciliation triggers when verification fails, here you might have triggered password change, which after trying 5 times(default), will disable the password object.
You are trying to change the password of 'PSMConnect' which is believe, is on Domain.
The errors encountered are because of Windows or domain properties, is that the case?
03-30-2020 01:56 AM
Hi @Phil Yu This is only a work around. I would suggest you to check why the account cannot change its password and fix it.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

