- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
03-28-2025 03:40 AM
the problems started once CredentialGuard was enabled.
Updating the 007 VM from v1/Standard to v2/Trusted Launch with SecureBoot and vTPM enabled worked fine
after enabling credential guard and rebooting, the server does not boot anymore
Windows Boot Manager
Status: 0xc0000001
https://learn.microsoft.com/en-us/windows/security/identity-protection/credential-guard/
Is CredentialGuard supported by CyberArk? Thank you
03-28-2025 06:47 AM
that's what I thought - I def would not enable this on the Vault server.
I would say based on your testing, yes - it appears it can cause logon problems. I would suggest turning it off.
The Vault hardening is laid out here:https://community.cyberark.com/s/article/Vault-Hardening-Overview
-Matt
03-28-2025 05:59 AM
Hey @Martin Dobos
Which server did you enable it on?
AFAIK we do not officially support this enabled on CyberArk servers as they should be hardened by our suggested process and not need it.
-Matt
03-28-2025 06:16 AM
Hi Matt,
It is Vault server.
Can this Credential Guard enablement cause boot problem? What are those hardening settings to check?
Thank you.
03-28-2025 06:47 AM
that's what I thought - I def would not enable this on the Vault server.
I would say based on your testing, yes - it appears it can cause logon problems. I would suggest turning it off.
The Vault hardening is laid out here:https://community.cyberark.com/s/article/Vault-Hardening-Overview
-Matt
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

