Does CCP work in HA environment?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Does CCP work in HA environment?

L0 Member

I have HA virtual IP 10.100.147.80 with .81 and .82 two nodes under it. CP environment was created using .80 ip on active node .81. Password retrieval was good on .81. But after switched over the active to .82 node, Querying password fails with this error: "EN013E Failed to decrypt message (Reason: Error finalising cipher data: pad block corrupted)". The question is do I have to recreate the CP environment for newly activate node?

1 accepted solution

Accepted Solutions

L7 Applicator

Hi @Bill Weng​ 

 

Yes, the CCP can be configured to be HA. Please see the following load balancing requirements and configuration document.

 

https://docs.cyberark.com/credential-providers/latest/en/content/ccp/load-balancing-the-central-credential-provider.htm

 

These are the points to consider for troubleshooting

 

  • Are both CCP working individually as expected?
  • In the Load Balancer, are both CCP showing as healthy?
  • Please check the Load Balancer logs to capture the traffic
  • Are you using SSL certificate on load balancer with HA VIP and have added .81 and .82 with their FQDNs?

 

Please also refer to the https://docs.cyberark.com/credential-providers/14.0/en/content/ccp/ccp-installation.htm

View solution in original post

1 REPLY 1

L7 Applicator

Hi @Bill Weng​ 

 

Yes, the CCP can be configured to be HA. Please see the following load balancing requirements and configuration document.

 

https://docs.cyberark.com/credential-providers/latest/en/content/ccp/load-balancing-the-central-credential-provider.htm

 

These are the points to consider for troubleshooting

 

  • Are both CCP working individually as expected?
  • In the Load Balancer, are both CCP showing as healthy?
  • Please check the Load Balancer logs to capture the traffic
  • Are you using SSL certificate on load balancer with HA VIP and have added .81 and .82 with their FQDNs?

 

Please also refer to the https://docs.cyberark.com/credential-providers/14.0/en/content/ccp/ccp-installation.htm

  • 1 accepted solution
  • 186 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!