- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
03-08-2026 10:13 PM
Hi All,
Need help on PSMWebApp connections.
Connection able to establish without any issues and after sometime getting an error: Login Failed, Validation Failed. refer to the log for more information.
05/03/2026 | 19:48:45] | :: | PSMDU018E Dispatcher error: [Validation :: Run -> Timeout error. Element 'modules-logo-logo' was not found in new page. ]
[05/03/2026 | 19:48:45] | :: | PSMDU018E Dispatcher error: [ConnectionComponentController :: PopUpErrorMessageBox -> Title="Error Occurred" Message="Validation failed. Refer to the log for more information." Timeout=30 Subtitle="Login failed"]
Can someone help me, why session is being disconnected after a while (after about 2-3 Min).
TIA,
03-09-2026 05:42 AM
Looks like it cannot find following element on the page for validation:
[Validation :: Run -> Timeout error. Element 'modules-logo-logo' was not found in new page.]
Disable the validation from parameters and then remove it temporarily from the WebForm. If there's no timeout afterwards, you have to find another element to use for validation.
03-09-2026 10:13 AM
Try removing the validation in web form field and see if same issue occurs. If issue stops, fix the validation element as mentioned above
03-10-2026 12:19 AM
Thanks for your respose @Przemysław Olszewski & @Patrick Booth .
I have inspected the console and changed webform settings by xpath search, still facing same issue.
Disable the validation from parameters and then remove it temporarily from the WebForm --- How to do this, i didn't get.
Can you help me.
TIA,
03-10-2026 02:59 AM
I assume the web page opens in a small window which doesn't display the identifier used as validation.
I suggest you find something else on the web page which shows/displays even in a small window as identifier for validation.
03-11-2026 07:32 AM
The parameter can be changed by going to PVWA → Configuration Options → Connection Components → select the relevant CC → Target Settings → Client Specific → RunValidations.
It is not necessary for this parameter to exist for the validations to run, so make sure you also remove the line from the WebForm where it references the validation - the line containing (Validation).
In your case, I believe it would look something like:
modules-logo-logo > (Validation)(searchby=id)
Once this is done, either restart the PSM service on the PSM server where this Connection Component is running, or wait approximately 10–15 minutes for the settings to replicate.
If it doesn't work, are you able to share your WebForm fields and the part of the page that you try to validate against?
03-11-2026 08:51 PM
current settings of RUN Validations = NO
And webform fields are:
(Wait=5)
IAMUsernameInputId>{Username}(searchby=id)
IAMPasswordInputId>{Password}(searchby=id)
btn_submit>(Button)
getVerifyCodeBtn>(Validation)(searchby=id)
I have also tried with xpath:
//*^[@id="i0116"^]{Username}(searchby=xpath)
//*^[@id="idSIButton9"^]>(Button)(searchby=xpath)
//*^[@id="i0118"^]>{Password}(searchby=xpath)
//*^[@id="idSIButton9"^]>(Button)(searchby=xpath)
Both are not working, getting same error after 2-3 min.
For sometime session works fine then we get the error.
03-12-2026 03:56 AM
You still have a validation in the first code you provided:
getVerifyCodeBtn>(Validation)(searchby=id)
(Wait=5) at the beginning shouldn't be required. WebDispatcher will wait for the website to load before it starts inputting creds. It's defined with PageLoadTimeout parameter in Client Specific settings: https://docs.cyberark.com/pam-self-hosted/latest/en/content/pasimp/psm_webapplication.htm#Configuration
XPath code you provided looks valid so unless your login panel is different from regular Azure portal it should work.
Have you tried using default code for Azure Portal?
i0116 > {username}
idSIButton9 > (Button)
i0118 > {password}
idSIButton9 > (Button)
idDiv_SAOTCC_Title > (Validation)
idDiv_SAOTCAS_Title > (Validation)
idBtn_Back > (Validation)
03-12-2026 05:57 AM
Thanks i will try this and update here.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

