- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
08-23-2019 11:04 AM
Guys,
I found nothing about it, but in cyberark supports the group ldap within group or user need to stay in the root of the group? We tried a group within group deployment with users, but the tool did not recognize and when the user was in the root of the group gained the permissions set in safe. Has anyone seen or know anything about?
Thank you
08-27-2019 07:37 AM
@Rafael Chagas
I'm surprised you haven't received a comment on this question as it comes up a lot. The groups within groups are called 'nested groups'. This is something that can work, but it is not recommended as it severely impacts performance.
How the Vault works currently as you have it setup is that it will only search through root level groups in LDAP for users. It will not expand the groups nested within the parent groups. If you want to allow the use of nested groups it will force the Vault to dive into each nested group for every directory mapping. This can cause a single logon for a user to take anywhere from 30 seconds to over a minute due to this.
If you are ok with the performance hit then you'd want to follow this Article:
https://community.cyberark.com/s/article/00002930
good luck!
-Matt
08-27-2019 07:32 AM
@Matt Jennison
Do you know anything about it?
Thank you!
08-27-2019 07:37 AM
@Rafael Chagas
I'm surprised you haven't received a comment on this question as it comes up a lot. The groups within groups are called 'nested groups'. This is something that can work, but it is not recommended as it severely impacts performance.
How the Vault works currently as you have it setup is that it will only search through root level groups in LDAP for users. It will not expand the groups nested within the parent groups. If you want to allow the use of nested groups it will force the Vault to dive into each nested group for every directory mapping. This can cause a single logon for a user to take anywhere from 30 seconds to over a minute due to this.
If you are ok with the performance hit then you'd want to follow this Article:
https://community.cyberark.com/s/article/00002930
good luck!
-Matt
08-27-2019 07:42 AM
@Matt Jennison
What would this setting look like? If the client wanted the research done this way?
08-27-2019 07:44 AM
@Rafael Chagas
I'm not sure what you are asking. The article linked should explain how to update the settings.
-Matt
08-27-2019 07:56 AM
Thank you for your support.
I validated the link that's exactly what I needed.
08-28-2019 12:52 PM
@Matt Jennison
Where do I configure this directory map line?
(& (objectclass = person) (memberof: 1.2.840.113556.1.4.1941: = cn = topgroup, cn = users, dc = domain, dc = com))?
I didn't find this line in any of the mappings I already have: (& (objectclass = person) (memberof = cn = topgroup, cn = users, dc = domain, dc = com))
could you explain me or pass a link with step by step?
do I need to create a new rule? what would it be like?
Thank you!
08-29-2019 07:56 AM
@Matt Jennison
Have you made any settings accordingly? have any article could you recommend me?
08-29-2019 09:39 AM
Hey @Rafael Chagas
You need to replace what you have: "(& (objectclass = person) (memberof = cn = topgroup, cn = users, dc = domain, dc = com))" with the new string:"(& (objectclass = person) (memberof: 1.2.840.113556.1.4.1941: = cn = topgroup, cn = users, dc = domain, dc = com))" . The steps should be the same as when you originally set these up, but with the settings to allow for the use of nested groups.
The links Article should provide the necessary details, but if it's not enough please let me know and I'll see if we can expand it to make things more clear.
-Matt
08-29-2019 11:36 AM
@Matt Jennison
So these strings I see in the map directory inside the vault right? I did not find this string that is informed in the article to exchange or am seeing in the wrong place?
09-02-2019 09:57 AM
@Matt Jennison
Do I put this string here? do I need to edit it and put some information from my domain? I can't make this setting
09-04-2019 08:15 AM
@Rafael Chagas
yup, that's the correct location.
-Matt
11-23-2019 03:26 AM
Hi @Matt Jennison ,
I did try the nested group functionalities by following the KB, but when I click on the Test button in the Private Ark client, no users appear. Able to assist on this?
Thank you.
Best Regards,
Sherice Ching
12-02-2019 08:00 AM
hey @Sherice Ching
I would need more information on the issue.
Do you have any working directory mappings?
Does the same query via LDP function? This is a good way to test outside Cyberark to ensure things on the LDAP side are working properly.
-Matt
05-19-2026 08:44 AM
Is this also applicable, still, to Privilege Cloud ?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

