PSM black screen

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PSM black screen

L3 Networker

I have an error in PSM that every week presents a black screen when entering via RDP, it is seen that the server is active and with normal resources in vsphere, what could be the cause of this error?

7 REPLIES 7

L7 Applicator

There are a couple of potential causes I know of.

 

https://community.cyberark.com/s/article/PSM-server-shows-black-screen-intermittently

 

https://community.cyberark.com/s/article/PSM-needs-to-be-regularly-rebooted

 

The second will occur on heavily used win 2016/2019 servers using RemoteApp.

We had this issue on a large on prem PAS deployment.

 

We tracked this down to an issue with RDP session ids recycling.

To check if you have a similar issue try:

query session /counter

If the current session id - of your session - is close to "Total sessions created" then you have the same symptoms.

 

We tried the solutions mentioned on the articles above (VolatileNotifications, Notifications), however we eventually found out that the root cause is related to AppLocker.

 

=> try to change AppLocker configuration to audit only on all categories and reboot server once.

 

Of course this is a workaround, now need to understand which Appx/Exe or DLL is blocked by Applocker and eventually blocks the server.

L5 Sessionator

Excessive use of the target machine or PSM resources is also one of the reasons

L4 Transporter

Hi @William Shinin​ 

 

Since several community members answered your question, please let us know if these solutions addressed your query.

If so, it would be great if you could mark the most helpful response as 'Select as Best' to assist other community members with similar questions.

 

Thank you, Liad.

If services 1 and 2 (CDPSvc and Wlidsvc) referring to the first article do not appear in the services section, can I disable them from the registry?

The command "query session /counter" where do I run it in PSM, powershell or cmd?

Just a cmd command: query session | Microsoft Learn

  • 788 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!