- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
12-21-2020 06:33 AM
Hi All,
Am trying to install .net version of 4.8 on vault after hardening by it is failing. This is required for upgrading our Dev env from 11.7 to 12.0
Kindly help out to proceed as this is prerequisite for Cyberark upgrade
Thanks,
12-22-2020 12:28 AM
Aaaaaaaand *how* is it failing? Check out the open/close WSUS scripts, you may need to start the Windows Installer & Co services first.
12-22-2020 05:07 AM
We have already enabled Windows installer services and tried installing and it doesn't work out. Now trying to configure WSUS on vault to check if it works
10-25-2021 07:12 AM
Check out this documentation: https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PAS%20INST/Patch-the-Vault-server-manually.htm
This basically describes the steps to start the Windows Update, Windows Module Installer and the Windows Installer service.
10-25-2021 09:39 AM
In the installer folder under WSUS (\Server-RLS-v?????\WSUS\) there is a PowerShell script that is called OpeningServices.ps1. Run that script as administrator to enable the installation of the .Net package. Once completed reboot the vault and confirm that the install/patch has been applied successfully. Once that is completed run ClosingServices.ps1 to reharden the vault. This can be used to also install other Microsoft Patches that may need to be installed manually.
10-25-2021 10:09 AM
Here's all steps on how I was able to install it manually:
a. Upload the .Net file to the Vault Server machine.
b. Navigate to Services Management.
• Enable and start the Windows Update service.
• Enable and start the Windows Module Installer service.
• Navigate to Registry Editor.
• Locate the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver entry.
• Back up the entry.
• Change the value of Start to 3.
• Restart the Vault Server.
• Navigate to Services Management and start the Windows Installer service.
c. Navigate to Services Management.
• Stop the CyberArk Disaster Recovery service.
• Stop the CyberArk Database service.
• If applicable, stop the PrivateArk Remote Control Agent service.
d. Install the .Net. Restart the Vault server if requested to.
e. Verify the .Net version installed successfully on the server.
f. Navigate to Services Management.
• Stop and disable the Windows Update service.
• Stop and disable the Windows Module Installer service.
• Stop and disable the Windows Installer service.
• Navigate to Registry Editor.
• Locate the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver entry.
• Change the value of Start to 4.
• Restart the Vault Server.
g. Repeat step 1 for all DR Vaults, followed by the Primary Candidate. To disable automatic failover:
• Open the PADR.ini file located at PADR/conf.
• Set EnableFailover=no and save the file.
• Restart the CyberArk Disaster Recovery service on the Primary Candidate.
05-08-2022 09:31 PM
It solved .NET framework 4.8 installation error of "The parameter is incorrect" on Vault server to be upgraded. Thanks.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

