- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
03-13-2025 11:25 AM
We have a Rehat 8 PSMP server, which was patched. Following reboot it had issues with the SSSD service and was unable to connect to AD and was showing disconnected in the vault.
Following updates to SSSD config and re-creating the cred files for the psmpgwuser, psmpadbridgeserveruser & psmpappuser. The PSMP is now showing connected in cyberArk and talking to the vault successfully.
However, when initiating a seamless connection using Putty in the below format:
<vaultUsername>@<account>@<dest ip>@<PSMP IP>
the login fails with "access denied".
The vault user in use has rights, and shows no violations in privateArk when authenticating so the auth attempt failure seems to be before the vault auth.
The only information we have is the /var/log/secure log, which shows the below entries when the login prompt appears for the user:
Mar 13 17:36:04 psmp1 sshd[62154]: debug1: userauth-request for user [email protected]#[email protected] service ssh-connection method none [preauth]
Mar 13 17:36:05 psmp1 sshd[62154]: Invalid user [email protected]#[email protected] from 198.1.1.1 port 54283
Mar 13 17:36:05 psmp1 sshd[62154]: debug1: PAM: initializing for "[email protected]#[email protected]"
Mar 13 17:36:07 psmp1 sshd[62154]: Failed none for invalid user [email protected]#[email protected] from 198.1.1.1 port 54283 ssh2
After entering the requested password, the below messages then appear:
Mar 13 17:36:56 psmp1 sshd[62154]: debug1: userauth-request for user [email protected]#[email protected] service ssh-connection method password [preauth]
Mar 13 17:36:59 psmp1 sshd[62154]: Failed password for invalid user [email protected]#[email protected] from 198.1.1.1 port 54283 ssh2
Can anyone suggest where the issue may lie here?
Thanks
03-14-2025 02:35 AM
Are there any security settings in the sshd_config file that prevents remote logon
03-14-2025 04:40 AM
Hi @John Evans
Please try manually login to target host using target account and if that works, it will confirm the issue with PSMP authentication.
Also please check that AllowUsers or DenyUsers parameters in /etc/ssh/sshd_confi are not restricting access for target account.
03-17-2025 01:31 AM
thanks both, We've tested the target account on a separate PSMP which works without issue.
We have the below in the sshd_config which has been copied from a working server:
AllowGroups PSMConnectUsers proxymng root user1 user2 user3 ansible cgd.sva.lnx.adm
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
# PSMP Authentication Configuration Block Start
Match Group PSMConnectUsers
AuthenticationMethods publickey,keyboard-interactive keyboard-interactive
AuthorizedKeysCommand /opt/CARKpsmp/bin/psshkeys_runner.sh
AuthorizedKeysCommandUser root
# PSMP Authentication Configuration Block End
It seems for whatever reason the account being used to login is not found in the PSMPConnectUsers group when it logs in:
Mar 14 13:34:17 fb1pcybpmp17 sshd[5871]: debug3: checking match for 'Group PSMConnectUsers' user [email protected]#[email protected] host 198.1.2.3 addr 198.1.2.3 laddr 198.1.2.3 lport 22
Mar 14 13:34:17 fb1pcybpmp17 sshd[5871]: debug1: Can't match group at line 147 because user [email protected]#[email protected] does not exist
Mar 14 13:34:17 fb1pcybpmp17 sshd[5871]: debug3: match not found
Mar 14 13:34:17 fb1pcybpmp17 sshd[5871]: Invalid user [email protected]#[email protected] from 198.1.2.3 port 61753
03-17-2025 03:08 AM
Hi, can you check if PermitEmptyPasswords value has been changes. This may affect PSMConnectuser
03-17-2025 03:21 AM
Hi Somidi.
It is set as below:
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
PermitEmptyPasswords no
PasswordAuthentication yes
this is the same setting as on another server, which seems to be working as expected.
04-08-2025 01:08 AM
Hello @John Evans
Have you received an answer to your question? If so, we kindly encourage you to share it with us.
Your insights could be valuable to other community members in the future.
Thank you, Isar.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

