Cisco ACI-Plugin for Panorma: IP Subnet of BridgeDomain not being synced

[JonasStalder]

Dear Guys

we have a Cisco ACI in place that polcy redirects all traffic to our Palo DC firewall.

For creating policies we rely on the Cisco ACI Plugin to sync endpoint information (IPs, Subnets, etc.) from ACI.

The issue: The "bridge domain" element is not synced with the corresponding subnet (10.xxx.171.254/22 => 10.xxx.168.0/22) but with the IP of the anycast gateway 10.xxx.171.254. But, there are many other IPs in that BD. (see printscreen)

In the printscreen, there is a column for "IP subnet/range" but this information is not going to be synced.

Is this behavour correct or:

1. shouldn't all the endpoints be synced?

2. shouldn't the subnet it self of the bridge domain be synced?

Thanks for helping!