- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
05-09-2022 10:33 AM
I recently imported a new pair of ha firewalls into Panorama; however, when I push the template with the option force template value enabled, I receive the following error:
**************************************************************************
High-availability ha1-backup interface ipaddr configured to match peer-ip-backup address ( module: ha_agent)
-client ha_agent phase 1 failure
_commit failed
*************************************************************************
Note:
-I've configured the ha1 backup on both firewalls to be the management interface.
-There are no issues when I push the templates without the force template value enabled.
-Panorama OS version is 10.1.5h1, and the firewalls are running on the same version.
05-09-2022 12:35 PM
Hi @Hamids2021 ,
It looks like you are pushing the same IP address to both firewalls. If you want to push the HA config from Panorama, you will need to use template variables so that the IP addresses are different. Alternatively, you could remove the HA config from Panorama, and configure it locally.
Thanks,
Tom
05-09-2022 12:35 PM
Hi @Hamids2021 ,
It looks like you are pushing the same IP address to both firewalls. If you want to push the HA config from Panorama, you will need to use template variables so that the IP addresses are different. Alternatively, you could remove the HA config from Panorama, and configure it locally.
Thanks,
Tom
08-02-2025 11:47 AM
in the panorama configuration, for 2 HA firewalls under on common template, how is it possible to use the template, as only 1 set of opposing-side IP's is exposed in this setting on the general tab:
Peer HA1 IP Address
|
192.168.255.2
|
Backup Peer HA1 IP Address
|
192.168.255.6
|
the screenshot shows the local firewall config, but if I replace these values in panorama with variables, there is only one spot to do that and if both opposing firewalls are under this one configuration, then they will have duplicate ips, correct? this seem wrong to me.
08-05-2025 01:33 PM
Hi @anon4all ,
You use variables in the template configuration, and then edit those variables under Panorama > Managed Devices > Summary for one of the NGFWs so that the IP addresses are different.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!