Panorama moving to LEGACY MODE

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Panorama moving to LEGACY MODE

L3 Networker

 

We have a Panorama in VMware ESXi, and this Panorama is in legacy mode. What are the reasons for moving to legacy mode?

 

I know that the Panorama mode will switch to legacy mode if the resources do not meet the minimum requirements. However, when I tried creating a new Panorama with very minimum memory and CPU, it remained in mgmt-mode, while the same production Panorama with more CPU resources is in legacy mode. Can anyone help understand the issue and suggest how to fix it?

 

NEW PANORAMA

AkashThangavel_0-1733733789195.png

 

PRODUCTION PANORAMA

AkashThangavel_1-1733733984977.png

 

regards,

Akash Thangavel

Network Security Engineer

 

Akash Thangavel, Network Security Engineer
1 REPLY 1

L5 Sessionator

If my understanding is correct, you can't create new legacy mode with latest pan-os.

If you need lagacy mode environment, I believe you need to prepare very old image with lagacy mode and then keep upgrading it 'til the latest.

https://docs.paloaltonetworks.com/panorama/11-1/panorama-admin/panorama-overview/panorama-models

Legacy mode (ESXi and vCloud Air only)—In this mode, the Panorama virtual appliance receives and stores firewall logs without using a local Log Collector (see Deploy Panorama Virtual Appliances in Legacy Mode with Local Log Collection). By default, the virtual appliance in Legacy mode has one disk partition for all data. Approximately 11GB of the partition is allocated to log storage. If you need more local log storage, you can add one virtual disk of up to 8TB on ESXi 5.5 and later versions or on vCloud Air. Earlier ESXi versions support one virtual disk of up to 2TB. If you need more than 8TB, you can mount the virtual appliance in Legacy mode to an NFS datastore but only on the ESXi server, not in vCloud Air. This mode is only available if your Panorama virtual appliance is in Legacy mode on upgrade to PAN-OS 10.0. On upgrade to PAN-OS 9.0 and later releases, Legacy mode is no longer available if you change to any other mode. If you change your Panorama virtual appliance from Legacy mode to one of the available modes, you will no longer be able to change back into Legacy mode.

 

 

  • 133 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!