Prisma SD-WAN Virtual Bypass Pair On 3108v

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Prisma SD-WAN Virtual Bypass Pair On 3108v

L0 Member

How do you properly setup 'Virtual Bypass Pairs' on virtual IONs for a branch HA design? The Palo documentation implies you can use bypass pairs (via the link below), but the configuration is not straightforward. I'm trying to setup branch HA on a couple of 3108v on VMware ESXi.

 

https://docs.paloaltonetworks.com/prisma/prisma-sd-wan/prisma-sd-wan-admin/prisma-sd-wan-sites-and-d...

1 REPLY 1

L1 Bithead

For virtual HA designs it's preferable not to use bypass pairs (given there is no hw bypass support), instead each WAN interface should have it's own unique IP address to avoid IP address conflicts. The rest of the design on the LAN side can be the same as a normal HA design.

  • 2181 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!