- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-20-2025 06:30 AM
For context, we are about to migrate to the ISSSP from standalone next week, and have performed pre-requisite, and while trying to upgrade PSM through connector management, I can't get pas the first error "PSMIOO1E A required privilege is not held by the client"
What could be causing this, and what's fix for this? I am unable to find ressources for this error.
Thanks.
02-20-2025 01:52 PM
We found an article that fixes this issue, We are still not able to fix it though, because the system is not allowing us to add the user rights mentioned, but maybe it can work for you. Please let me know if it works for you.
https://community.cyberark.com/s/article/Connector-Management-Install-Upgrade-failure
02-21-2025 01:08 AM
I can definitely second this. If you're unable to update these settings because they are greyed out, reach out to the team managing your Group Policy Objects (GPO) and ask them to add the account.
We've run into this issue before, as the CyberArkManagementAgent is a local NT Service account, meaning it won’t show up when configuring the GPO centrally. Ideally, you’d be deploying the CyberArk Unified Hardening GPO, which should already have these settings configured. However, we don’t use that approach since we’ve separated our PSM & CPM components, and running the unified GPO would apply settings for both, which doesn’t make sense for our setup (as it’s meant for servers running both PSM & CPM).
To work around this, we’ve found two options (both should be carefully assessed for security impact in your environment):
The ideal solution would be the unified GPO (assuming you’re on Privilege Cloud), but if your setup is like ours (dedicated PSM & CPM servers), this could impact security posture. I’ve spoken with CyberArk about this, and they’ve confirmed there are no plans to include CyberArkManagementAgent GPO settings in the CPM-only hardening GPO. As a result, we’ve had to rely on one of the two options mentioned above.
Hope this helps—or at least gives you some additional context!
02-21-2025 07:00 AM
@Kelfa Carew Our System admin said that the GPO blocks it from being changed locally. You could disable the policy and change it but he doesn't know if re-enabling would wipe away any changes. Do you have any suggestions on this?
Thank you again for your detailed answer.
02-24-2025 09:05 AM
Hi @Yvette Ishimwe ,
I'm no expert with GPOs, but I wonder if you could set/create a new GPO with a higher link order that would allow this to be changed locally. Alternatively, you could just apply the Unified hardening GPO to those servers, which should also resolve the issue as the CyberArkManagementAgent account is specified within that GPO. If you don't want to do that either, you could just add NT Service\All Services to the GPO that's being applied to those CyberArk servers (however a word of caution this would need to be threat assessed against the number of service accounts within your environment).
02-26-2025 06:31 AM
best practice for connector machines in a Domain is to be in a unique OU which has GPO inheritance blocked, and then apply hardening universal GPO to that OU only.
If you are unable to block inheritance then you may find settings which conflict with the hardening. Run the tool GPRESULT on the connector machine to get a full report of all settings, and it sounds like you will need to manually review all the settings to identify which ones are in conflict with the unified hardenning GPO.
eg GPRESULT /S system /H gpresult1.html
The full list of applied parameters in the GPO is:
Connector GPO parameters | CyberArk Docs
02-27-2025 03:41 AM
Hi @Yvette Ishimwe
Since several community members answered your question, could you kindly share if any of these solutions resolved your issue?
If so, could you please mark the appropriate answer as "Select as Best" to assist other community members.
If the issue is still relevant, I would advise raising a ticket with our support team for further assistance.
Thank you, Liad
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

