Hello guys! Question: We´re implementing the Privilege Cloud solution. What would be the criteria to decide how many PSM, CPM and PVWA we need to set up. For example, number of credentials, number of concurrent sessions etc... Thank you!

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Hello guys! Question: We´re implementing the Privilege Cloud solution. What would be the criteria to decide how many PSM, CPM and PVWA we need to set up. For example, number of credentials, number of concurrent sessions etc... Thank you!

4 REPLIES 4

L6 Presenter

You can use the charts on this page to determine the server sizing: https://docs.cyberark.com/Product-Doc/OnlineHelp/PrivCloud/Latest/en/Content/Privilege%20Cloud/PrivCloud-sys-req-connector.htm#Hardwarerequirements

 

Other factors play into how many connectors you need to deploy; for example, network segmentation. If you need to manage targets in a DMZ as well as a production network and you can't open the firewall between them, then you need at least two connectors to handle the two network segments. If you want redundancy within those networks, then you're looking at 2 connectors per network segment so you can load balance your PSM and have an active/passive CPM setup.

 

If your network is relatively flat, a typical setup would be two connectors in the primary datacenter sized according to the hardware requirements above. You would then load balance them for the HA/redundancy you need.

Perfect. Very clear explanation. Thank you so much!

 

One more question. Isn´t the number of credentials a criteria for this also?

It can be a factor, but I don't think Privilege Cloud has documentation around that requirement. You can find the self-hosted requirements here and compare it to the Privilege Cloud ones to get an idea of what you will need:

 

https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/12.2/en/Content/PAS%20SysReq/Recommended%20Server%20Specifications.htm?tocpath=Installation%7CSystem%20Requirements%7C_____1#CPMservers

 

You can always resize your connector server after your deployment if necessary.

All right. Thanks for your support one more time. You helped me a lot.

  • 279 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!