Who Me Too'd this topic

Currently, I have one Panorama M-200 running OS version 10.1.12, and two PA-3220 devices running OS version 10.1.12 configured in HA Active-Passive mode. The PA-3220 devices are fully managed by Panorama, including configuration and log storage.

Now, I would like to upgrade the OS to version 11.1.13. I came across the “Skip Software Version” upgrade procedure in the Palo Alto KB, and I would like to confirm whether I can follow the steps below:

Panorama

1. Download 11.1.0 (Base Image)
2. Download 11.1.13 (Preferred Release)
3. Install 11.1.13 and reboot

PA-3220
Disable Preemption

PA-02 (Passive)

1. Download 11.1.0 (Base Image)
2. Download 11.1.13 (Preferred Release)
3. Install 11.1.13 and reboot

PA-01 (Active)

1. Suspend PA-01 to make PA-02 active
2. Download 11.1.0 (Base Image)
3. Download 11.1.13 (Preferred Release)
4. Install 11.1.13 and reboot

Is this procedure correct for a Skip Software Version upgrade?
Also, is there any function or feature that needs to be enabled beforehand to perform a Skip Software Version upgrade?

Thank you.