Who Me Too'd this topic

Hi,

Trying to rule out the a file transfer througputput issue,  looking at the interface stats,

1.  Is there a technote explain these values mean?

2.  What are these values mean snmpEtherStatsRXNoErrors and snmpEtherStatsTXNoErrors ?  

Thanks,

E

admin@PAN5260(active)> show system state filter-pretty sys.s1.p21.*

sys.s1.p21.capability: [
auto,
40Gb/s-full,
100Gb/s-full,
]
sys.s1.p21.cfg: {
farloop: False,
mode: Autoneg,
mru: 10048,
nearloop: False,
pause-frames: True,
setting: auto,
}
sys.s1.p21.detail: {
snmpBcmEtherStatsPkts1519to1522Octets: 0x76e7efb3da,
snmpBcmEtherStatsPkts1522to2047Octets: 0x1,
snmpBcmReceivedPkts1024to1518Octets: 0xef7496da,
snmpBcmReceivedPkts128to255Octets: 0x138bed9aa,
snmpBcmReceivedPkts1519to2047Octets: 0x18970ada0a,
snmpBcmReceivedPkts256to511Octets: 0xdddd4674,
snmpBcmReceivedPkts512to1023Octets: 0x59ff10508,
snmpBcmReceivedPkts64Octets: 0x5ff43efa,
snmpBcmReceivedPkts65to127Octets: 0x60c9b129c,
snmpBcmTransmittedPkts1024to1518Octets: 0x4da507bb22,
snmpBcmTransmittedPkts128to255Octets: 0x1c36d46b7,
snmpBcmTransmittedPkts1519to2047Octets: 0x5e50e4d9d1,
snmpBcmTransmittedPkts256to511Octets: 0x1fdacbec9,
snmpBcmTransmittedPkts512to1023Octets: 0xa6422784f,
snmpBcmTransmittedPkts64Octets: 0xba4d1bb2,
snmpBcmTransmittedPkts65to127Octets: 0xec2fa90e1,
snmpDot1dTpPortInFrames: 0x27a99be7a1,
snmpDot1dTpPortOutFrames: 0xc99870bf5f,
snmpEtherStatsBroadcastPkts: 0xade36,
snmpEtherStatsMulticastPkts: 0x1432c34,
snmpEtherStatsOctets: 0x4b8eff6eadf65,
snmpEtherStatsPkts: 0xf1420ca700,
snmpEtherStatsPkts1024to1518Octets: 0x4e947c51fc,
snmpEtherStatsPkts128to255Octets: 0x2fc2c2061,
snmpEtherStatsPkts256to511Octets: 0x2db8a053d,
snmpEtherStatsPkts512to1023Octets: 0x1004137d57,
snmpEtherStatsPkts64Octets: 0x11a415aac,
snmpEtherStatsPkts65to127Octets: 0x14cf95a37d,
snmpEtherStatsRXNoErrors: 0x27a99be7a1,
snmpEtherStatsTXNoErrors: 0xc99870bf5e,
snmpIfHCInBroadcastPkts: 0x54,
snmpIfHCInMulticastPkts: 0x1402bc5,
snmpIfHCInOctets: 0xa9450db5adc6,
snmpIfHCInUcastPkts: 0x27a85bbb88,
snmpIfHCOutBroadcastPckts: 0xadde2,
snmpIfHCOutMulticastPkts: 0x3006f,
snmpIfHCOutOctets: 0x40faae935319f,
snmpIfHCOutUcastPkts: 0xc99862e10e,
snmpIfInBroadcastPkts: 0x54,
snmpIfInMulticastPkts: 0x1402bc5,
snmpIfInNUcastPkts: 0x1402c19,
snmpIfInOctets: 0xa9450db5adc6,
snmpIfInUcastPkts: 0x27a85bbb88,
snmpIfOutBroadcastPkts: 0xadde2,
snmpIfOutMulticastPkts: 0x3006f,
snmpIfOutNUcastPkts: 0xdde51,
snmpIfOutOctets: 0x40faae935319f,
snmpIfOutUcastPkts: 0xc99862e10e,
}
sys.s1.p21.phy: {
link-partner: { },
media: QSFP-Plus-Fiber,
sfp: {
connector: LC,
encoding: 64B66B,
identifier: QSFPP,
transceiver: ,
vendor-name: FINISAR CORP. ,
vendor-part-number: FTL4C1QE1C ,
vendor-part-rev: A1e<A4>,
},
type: Ethernet,
}
sys.s1.p21.qos: {
cir: 100000000,
flow: 1040,
index: 0,
queue: 280,
type: bypass,
}
sys.s1.p21.rate: {
duration: 68,
last-sample: 2019-07-17 11:30:31,
rx-broadcast: 0,
rx-bytes: 40537224,
rx-multicast: 3,
rx-unicast: 35029,
tx-broadcast: 0,
tx-bytes: 90330672,
tx-multicast: 0,
tx-unicast: 73956,
}
sys.s1.p21.state: board_port_autoneg_enabled
sys.s1.p21.stats: {
rx-broadcast: 84,
rx-bytes: 186114047847878,
rx-multicast: 20982725,
rx-unicast: 170328308616,
tx-broadcast: 712162,
tx-bytes: 1143126638277023,
tx-multicast: 196719,
tx-unicast: 865845043470,
}
sys.s1.p21.status: {
farloop: False,
link: Up,
mode: Autoneg,
mru: 10048,
nearloop: False,
pause-frames: True,
setting: 40Gb/s-full,
type: QSFP-Plus,
}