- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-26-2020 04:39 AM - edited 02-26-2020 04:41 AM
Hi community,
I want to setup new panorama VM to replace old panorama M-100 and accept new devices.
I have deployed a vm on ESX with one disk of 81Gb and second disk of 2Tb.
Panorama running version 8.1.13,
you can see partial output of show system info to understand system mode and ressources allowed to VM.
**********
system-mode is panorama
operational-mode: normal
num-cpus: 16
ram-in-gb: 32
**********
our install respect system requirement for VM on esxi to use panorama on panorama mode with local log collector using one disk of 2Tb.
But after installation I have troubles with log collector and difficulties to undertands how panorama use virtual disk.
If i correctly understand process to use virtual disk added on esx to use it as local log collector inside panorama you need to make this.
1 - Add virtual disk on esx
2 - first optionnal virtual disk are seen on operating system as sdb drive.
3 - make active sdb drive on system
4 - configure log collector
4a - configure local log collector with serial numer of panorama
4b - add disk A to this collector (disk A is associate to sdb with previous action)
5 - add collector to collector groups
can you confirm this process or explain me how virtual disk are use inside panorama to local log collector.
So I added disk with "request system disk add sdb"
***********
admin@Panorama-VM-1000> show system disk details
Name : sdb
State : Present
Size : 2097152 MB
Status : Available
Reason : Admin enabled
***********
Issue appear after this when i add log-collector to panorama, i can correctly see space available for log storage but collector are disconnected and I didn't find ressources to explain this behaviours and define troubleshooting steps to resolve this issue.
You can see this log collector status below.
Anyone have an idea or a better understanding than me ?