Who rated this post

Our Data plane CPU usage is constantly on or above 90%.

We have a PA PA-3020.   PANOS 9.1.6

It is usually High only during business hours and after hours it is back to normal.

It has not affected the firewall performance and any traffic yet.

However we are worried what could be causing it and how can we optimize it.

We have followed this KB article, however not able to tell what is causing is and how can we optimize it

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClRTCA0

admin@PA-3020-secondary(active)> show running resource-monitor

Resource monitoring sampling data (per second):

CPU load sampling by group:
flow_lookup : 88%
flow_fastpath : 88%
flow_slowpath : 88%
flow_forwarding : 88%
flow_mgmt : 88%
flow_ctrl : 88%
nac_result : 88%
flow_np : 88%
dfa_result : 88%
module_internal : 88%
aho_result : 88%
zip_result : 88%
pktlog_forwarding : 88%
lwm : 0%
flow_host : 88%

CPU load (%) during last 60 seconds:
core 0 1 2 3 4 5
* 88 87 87 87 87
* 88 87 87 87 87
* 87 86 87 87 88
* 93 95 94 94 94
* 93 93 93 93 92
* 96 96 96 95 96
* 94 95 93 94 94
* 93 94 94 94 94
* 91 88 89 91 88
* 91 90 90 90 90
* 95 95 95 95 94
* 97 98 97 98 98
* 97 97 96 96 96
* 92 91 91 91 92
* 89 89 89 89 88
* 90 87 88 87 87
* 91 90 91 91 91
* 94 94 94 94 93
* 91 90 91 92 92
* 86 87 83 83 84
* 80 82 84 81 81
* 86 88 86 88 86
* 81 82 79 82 81
* 89 91 92 91 92
* 88 87 87 86 87
* 91 89 89 88 90
* 96 96 96 96 97
* 92 92 92 92 92
* 96 95 95 96 96
* 94 93 93 93 93
* 92 91 91 92 91
* 92 91 92 90 91
* 91 87 88 89 88
* 94 93 93 94 93
* 86 82 84 83 83
* 90 91 91 91 91
* 95 95 95 95 95
* 99 99 99 99 99
* 93 93 93 93 94
* 89 90 90 91 91
* 86 88 87 88 87
* 89 88 88 88 89
* 97 96 96 96 97
* 98 98 98 98 98
* 97 96 96 96 95
* 99 98 98 98 98
* 97 96 96 95 96
* 97 97 97 96 96
* 93 93 94 93 93
* 93 93 94 93 94
* 90 91 92 92 92
* 93 93 93 93 93
* 96 96 96 96 96
* 93 93 92 93 93
* 96 96 96 95 96
* 90 90 90 91 92
* 91 91 92 91 91
* 91 91 90 91 90
* 93 92 91 92 92
* 95 95 94 94 95

admin@PA-3020-secondary(active)> show session info

target-dp: *.dp0
--------------------------------------------------------------------------------
Number of sessions supported: 262142
Number of allocated sessions: 19694
Number of active TCP sessions: 13951
Number of active UDP sessions: 5296
Number of active ICMP sessions: 57
Number of active GTPc sessions: 0
Number of active GTPu sessions: 0
Number of pending GTPu sessions: 0
Number of active BCAST sessions: 0
Number of active MCAST sessions: 0
Number of active predict sessions: 559
Number of active SCTP sessions: 0
Number of active SCTP associations: 0
Session table utilization: 7%
Number of sessions created since bootup: 3127924831
Packet rate: 49729/s
Throughput: 261195 kbps
New connection establish rate: 503 cps
--------------------------------------------------------------------------------
Session timeout
TCP default timeout: 3600 secs
TCP session timeout before SYN-ACK received: 5 secs
TCP session timeout before 3-way handshaking: 10 secs
TCP half-closed session timeout: 120 secs
TCP session timeout in TIME_WAIT: 15 secs
TCP session delayed ack timeout: 250 millisecs
TCP session timeout for unverified RST: 30 secs
UDP default timeout: 30 secs
ICMP default timeout: 6 secs
SCTP default timeout: 3600 secs
SCTP timeout before INIT-ACK received: 5 secs
SCTP timeout before COOKIE received: 60 secs
SCTP timeout before SHUTDOWN received: 30 secs
other IP default timeout: 30 secs
Captive Portal session timeout: 30 secs
Session timeout in discard state:
TCP: 90 secs, UDP: 60 secs, SCTP: 60 secs, other IP protocols: 60 secs
--------------------------------------------------------------------------------
Session accelerated aging: True
Accelerated aging threshold: 80% of utilization
Scaling factor: 2 X
--------------------------------------------------------------------------------
Session setup
TCP - reject non-SYN first packet: True
Hardware session offloading: True
Hardware UDP session offloading: True
IPv6 firewalling: True
Strict TCP/IP checksum: True
Strict TCP RST sequence: True
Reject TCP small initial window: False
Reject TCP SYN with different seq/options: True
ICMP Unreachable Packet Rate: 200 pps
--------------------------------------------------------------------------------
Application trickling scan parameters:
Timeout to determine application trickling: 10 secs
Resource utilization threshold to start scan: 80%
Scan scaling factor over regular aging: 8
--------------------------------------------------------------------------------
Session behavior when resource limit is reached: drop
--------------------------------------------------------------------------------
Pcap token bucket rate : 10485760
--------------------------------------------------------------------------------
Max pending queued mcast packets per session : 0
--------------------------------------------------------------------------------

We noticed  our root patriation is high, and we after doing the cleaning process as per Palo alto guide it is still high.

Would this be causing the dataplane issue?