- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-01-2015 05:29 PM
Hi guys,
I just got my hands on a new PAN. I have setup an srx100 behind the PA-500. The interface Ethernet 2/8 is in the trust zone, is setup as a L3 interface and has an IP of 10.1.1.1. The SRX's IP is 10.1.1.2. The SRX's next-hop address is the PAN's gateway IP (10.1.1.1). A show route on the SRX confirms the route has been setup properly. Now, when I try to ping the PAN's gateway from the srx cli I get a timeout error. The cabling looks fine, both interfaces are in the same subnet, both interfaces are up and the routing tables on the srx look fine. Does anyone have any hinters on what could be causing the problem ? Does the PAN drop icmp packets by default or something ?