- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-12-2015 12:18 PM
Hi,
we're having an issue with 3050 very high cpu.new installed device and when checking dp file we see that ,
anyone can tell what can be cause this ? probably ? Thanks.
panos 6.1.4
packet buffer is not high,
packet descriptor is not high
session count is normal
throughput is normal
packet rate is between 80000-100000 at problem time.
Resource monitoring sampling data (per second):
:
:CPU load sampling by group:
:flow_lookup : 97%
:flow_fastpath : 90%
:flow_slowpath : 97%
:flow_forwarding : 97%
:flow_mgmt : 60%
:flow_ctrl : 60%
:nac_result : 97%
:flow_np : 90%
:dfa_result : 97%
:module_internal : 97%
:aho_result : 97%
:zip_result : 97%
:pktlog_forwarding : 98%
:lwm : 0%
:flow_host : 60%
:
:CPU load (%) during last 15 seconds:
:core 0 1 2 3 4 5
: 0 60 97 97 98 98
: 0 59 97 97 97 97
: 0 59 98 98 98 98
: 0 59 98 98 98 98
: 0 56 97 97 98 98
: 0 57 98 98 98 98
: 0 59 97 97 97 97
: 0 57 94 94 95 95
: 0 56 95 95 96 96
: 0 53 95 96 96 96
: 0 49 93 93 94 94
: 0 50 94 94 95 95
: 0 52 95 95 95 95
: 0 61 96 96 96 96
: 0 64 98 98 98 98
:
:Resource utilization (%) during last 15 seconds:
:session:
: 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19
:
:packet buffer:
: 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
:
:packet descriptor:
: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
:
:packet descriptor (on-chip):
: 7 6 3 3 4 4 4 4 3 5 4 3 3 5 6
:
:
:Resource monitoring statistics (per minute):
:CPU load (%) during last 15 minutes:
:core 0 1 2 3 4 5
: avg max avg max avg max avg max avg max avg max
: 0 0 53 60 95 99 95 99 96 99 96 99
: 0 0 55 66 96 100 96 100 96 100 96 100
: 0 0 55 66 95 100 95 100 96 100 96 100
: 0 0 58 69 97 100 97 100 97 100 97 100
: 0 0 57 65 97 100 97 100 97 100 97 100
: 0 0 59 69 99 100 99 100 99 100 99 100
: 0 0 59 73 97 100 97 100 97 100 97 100
: 0 0 57 65 98 100 98 100 98 100 98 100
: 0 0 54 66 97 100 97 100 97 100 97 100
: 0 0 55 67 97 100 97 100 97 100 97 100
: 0 0 53 63 96 100 96 100 96 100 97 100
: 0 0 52 58 96 99 96 99 96 99 96 100
: 0 0 46 57 93 99 93 99 93 99 93 99
: 0 0 47 62 92 98 92 98 93 98 93 98
: 0 0 55 70 95 99 95 99 95 99 95 99
:Resource utilization (%) during last 15 minutes:
:session (average):
: 19 21 19 20 20 20 21 20 20 19 20 19 18 19 18
:
:session (maximum):
: 20 22 20 21 20 21 22 22 20 20 21 20 19 19 19
:
:packet buffer (average):
: 0 0 0 1 0 1 1 1 0 0 0 0 0 0 0
:
:packet buffer (maximum):
: 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1
:
:packet descriptor (average):
: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
:
:packet descriptor (maximum):
: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
:
:packet descriptor (on-chip) (average):
: 4 5 4 6 4 6 6 6 4 5 4 4 3 5 5
:
:packet descriptor (on-chip) (maximum):
: 8 24 9 22 7 20 14 18 11 17 10 8 8 31 28
:
:--------------------------------------------------------------------------------
:Number of sessions supported: 524286
:Number of active sessions: 103036
:Number of active TCP sessions: 52227
:Number of active UDP sessions: 45340
:Number of active ICMP sessions: 89
:Number of active BCAST sessions: 0
:Number of active MCAST sessions: 0
:Number of active predict sessions: 1981
:Session table utilization: 19%
:Number of sessions created since bootup: 24249791
:Packet rate: 95996/s
:Throughput: 574825 kbps
:New connection establish rate: 2316 cps
:--------------------------------------------------------------------------------
:Session timeout
: TCP default timeout: 3600 secs
: TCP session timeout before SYN-ACK received: 5 secs
: TCP session timeout before 3-way handshaking: 10 secs
: TCP half-closed session timeout: 120 secs
: TCP session timeout in TIME_WAIT: 15 secs
: TCP session timeout for unverified RST: 30 secs
: UDP default timeout: 30 secs
: ICMP default timeout: 6 secs
: other IP default timeout: 30 secs
: Captive Portal session timeout: 30 secs
: Session timeout in discard state:
: TCP: 90 secs, UDP: 60 secs, other IP protocols: 60 secs
:--------------------------------------------------------------------------------
:Session accelerated aging: True
: Accelerated aging threshold: 80% of utilization
: Scaling factor: 2 X
:--------------------------------------------------------------------------------
:Session setup
: TCP - reject non-SYN first packet: True
: Hardware session offloading: True
: IPv6 firewalling: True
: Strict TCP/IP checksum: True
:--------------------------------------------------------------------------------
:Application trickling scan parameters:
: Timeout to determine application trickling: 10 secs
: Resource utilization threshold to start scan: 80%
: Scan scaling factor over regular aging: 8
:--------------------------------------------------------------------------------
:Session behavior when resource limit is reached: drop
:--------------------------------------------------------------------------------
:Pcap token bucket rate : 10485760
:--------------------------------------------------------------------------------