Thank you for the post @DexinLi
if you are trying to redistribute loopback interface of the Firewall, then it is redistribution of connected route and not RIP/OSPF learned route. I would try to configure 2 redistribution profiles under: Network > Virtual Router > [VR name] > Redistribution Profile
then create one for Loopback.1 (select source type: connect and select: Redist) and another one for Loopback.0 (select source type: connect and select: Redist).
Finally, I would redistribute profile for Loopback.1 into RIP and Loopback.0 into OSPF.
You can confirm result by checking routing table of R1 and R2.
Kind Regards
Pavel
Help the community: Like helpful comments and mark solutions.
