Content translations are temporarily unavailable due to site maintenance. We apologize for any inconvenience.
07-25-2022 12:30 AM - edited 07-25-2022 12:37 AM
Hi everyone,
A good day to all!
I encountered the following when upgrading the physical PA-5250 Firewalls from 10.0.10-h1 to 10.1.0 and from 10.1.0 to 10.1.5-h2.
Such that the Log Quota is reflected 0MB and there were no logs there were displayed (E.g. System Logs). When we enter the command ‘show system raid status’ on CLI, we saw that the spare disk was in a to be repaired state. Only when it displayed ‘Done checking the integrity of the RAID log details’ and started rebuilding then the logs start to appear and values were reflected on the Log Quota.
Is this a known issue for PA-5250 model as we upgraded the PA-3220 as well but there isn’t any occurrence of the above mentioned issue.
As far as I know PA-3220 will not display any RAID-related info as this model does not support raid.I suspect this as a FSCK. The firewalls are being managed by Panorama (PAN-PRA-25 ).
Can someone enlightened me what happened? Does traffic passes through the firewall if it's performing such Integrity checks?
Cheers,
Renz
