cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who rated this post

Yeah, that did the trick. Bit strange though. I had to failover to the secondary to re-add the firewall. If I did it on the primary then it would just come back on the secondary as disconnected again.

So

  • Remove device on primary, commit.
  • Remove panorama config from device.
  • Failover to secondary Panorama.
  • Add device, commit.
  • Re-dd primary and secondary Panorama config on device.
  • Verify device is reported as connected on both primary and secondary.
  • Fail back to primary.

View solution in original post

Who rated this post