cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who Me Too'd this topic

Palo Alto PA-3400 Series degraded specs vs 3200 Seires

L3 Networker

Dear Palo Alto Community

Is it just me, or did Palo Alto drop the ball on the new PA-3400 Series, while almost all specs gained an improvement over the old 3200 series. There is the value of Security-Zones that has me deeply confused/puzzled.

For the sticker price (whether it is list price or street price). Having a PA3410 with a max of 40 Security-Zones seems completely out of line. Especially compared to the rest of the new PA-x400 lineup.
If we look at the old PA-3200 they all have 200 Security-Zones supported and if we look at this comparison. There just seems to be a 0 missing with all PA-3400 firewalls. Now I know in most deployments 40 should be fine. But then again. We are talking a Firewall that can easily be used in deployments where 40 Zones can easily be reached. Not to forget that we always talk about an investment that needs to run for 5+ years in most cases.

PA-comparison.png

I hope there is just a 0 missing in the spec sheets. 
Also according to the spec sheet the PA-3400 series does not have any DoS Protection profile support.

And it looks like the performance values for HTTP and appmix are swapped (not sure about that one)

PA-3400-performance.png

 

Anybody else thinking there is something off?

 

Regards

Alex

There's no home like 127.0.0.1
Who Me Too'd this topic