- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
09-25-2025 11:57 PM
Hi Everyone,
I have some problem with my new build CCP. After installing, the service is running and on the PVWA shows green connect. However, when i try to test, it shows me this error:
I have check the logs in AppAuditLong and see this:
[22/09/2025 | 16:24:12] | :: | APPAU006E Provider Prov_VN-VWL5383 has failed to fetch password with query [Object=vn-administrator_10.19.168.102;Safe=ITSEC_TESTsafe] for application [VN.ITSEC.APP.Pipeline] for IP address [10.16.10.226]. Fetch reason: []. Failure reason: [APPAP008E Problem occurred while trying to use user in the Vault (Error: APPAP425E Failed getting application (AIMWebService) from backend. Diagnostic Info: 10)]
[22/09/2025 | 16:24:28] | :: | APPAU006E Provider Prov_VN-VWL5383 has failed to fetch password with query [Object=vn-administrator_10.19.168.102;Safe=ITSEC_TESTsafe] for application [VN.ITSEC.APP.Pipeline] for IP address [10.16.10.226]. Fetch reason: []. Failure reason: [APPAP008E Problem occurred while trying to use user in the Vault (Error: APPAP425E Failed getting application (AIMWebService) from backend. Diagnostic Info: 10)]
[22/09/2025 | 16:28:13] | :: | APPAU006E Provider Prov_VN-VWL5383 has failed to fetch password with query [Object=vn-administrator_10.19.168.102;Safe=ITSEC_TEST] for application [VN.ITSEC.APP.Pipeline] for IP address [10.16.10.226]. Fetch reason: []. Failure reason: [APPAP008E Problem occurred while trying to use user in the Vault (Error: APPAP425E Failed getting application (AIMWebService) from backend. Diagnostic Info: 10)]
[22/09/2025 | 16:28:14] | :: | APPAU006E Provider Prov_VN-VWL5383 has failed to fetch password with query [Object=vn-administrator_10.19.168.102;Safe=ITSEC_TEST] for application [VN.ITSEC.APP.Pipeline] for IP address [10.16.10.226]. Fetch reason: []. Failure reason: [APPAP008E Problem occurred while trying to use user in the Vault (Error: APPAP425E Failed getting application (AIMWebService) from backend. Diagnostic Info: 10)]
Anyone has any idea why does this happen?
09-26-2025 01:23 AM
hi @Quang Le
Based on the logs, it seems the user AIMWebService isn't defined.
Hence, check the Client users and groups in case you see the AIMWebService user. If not, follow this doc to create it and check the config:
https://docs.cyberark.com/credential-providers/latest/en/Content/CCP/Configure_CCPWindows.htm#Define
Restart the CP service after that and test again
09-26-2025 12:57 AM
hello @Quang Le
09-26-2025 12:57 AM
hello @Quang Le
09-26-2025 01:23 AM
hi @Quang Le
Based on the logs, it seems the user AIMWebService isn't defined.
Hence, check the Client users and groups in case you see the AIMWebService user. If not, follow this doc to create it and check the config:
https://docs.cyberark.com/credential-providers/latest/en/Content/CCP/Configure_CCPWindows.htm#Define
Restart the CP service after that and test again
09-26-2025 01:52 AM
Hi @Sumit Kumar ,
Yes, i check and see that the user is there and have access on Safe.
Yes, i see the service is running
Below is AppConsole logs
[26/09/2025 | 15:50:04] | :: | APPAP435I Credential Provider cache is encrypted in local mode
[26/09/2025 | 15:50:04] | :: | APPAP032I Main parameters file [main_appprovider.conf.Win.14.02] was loaded successfully
[26/09/2025 | 15:50:04] | :: | APPAP258I Supported addresses for this provider [10.19.168.104;]
[26/09/2025 | 15:50:04] | :: | APPAP035I Application Password Provider [Prov_VN-VWL5383] on machine [10.19.168.104] version [14.2.0.22] is up [AAM mode] and working with Vault [10.19.168.101]
09-26-2025 01:54 AM
I defined it with different name,
Was that ok?
09-26-2025 05:30 AM
Please name it according to the docs (if needed, redefine it)
https://docs.cyberark.com/credential-providers/latest/en/content/ccp/configure_ccpwindows.htm#Define
10-02-2025 03:18 AM
You can use any name but you need to define this in CCP config file as application name ...
10-02-2025 03:18 AM
You can use any name but you need to define this in CCP config file as application name ...
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

