08-24-2019 08:42 AM
Team,
i have scenarion to have automatic failover between tunnles build on aws direct connect and tunnels on Cisco ASA firewall onpremise.
Please let me know your suggestions.
08-28-2019 01:43 PM
Hello,
On the ASA you have to use a SLA. Check out these articles. The PAN is OK with multiple tunnels, just use a dynamic routing protocl between the two devices so the routes update and the PAN sends traffic down the correct tunnel. You can also use static rout monitoring or Policy Based routing. I prefer to use OSPF for simplicity.
https://community.cisco.com/t5/vpn-and-anyconnect/cisco-asa-dual-isp-vpn-redundancy/td-p/1723979
Regards,
09-04-2019 07:06 AM
Already we are using BGP routing protcol on Palo alto.
Do you want to use ospf Routing on both Palo and ASA
@OtakarKlier wrote:Hello,
On the ASA you have to use a SLA. Check out these articles. The PAN is OK with multiple tunnels, just use a dynamic routing protocl between the two devices so the routes update and the PAN sends traffic down the correct tunnel. You can also use static rout monitoring or Policy Based routing. I prefer to use OSPF for simplicity.
https://community.cisco.com/t5/vpn-and-anyconnect/cisco-asa-dual-isp-vpn-redundancy/td-p/1723979
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
