BGP issue between On-pre PA and Azure via a site to site VPN

[ToshiNakano]

I am trying to setup Azue site to site VPN with BGP. IPsec tunnel came up successfully and I can ping from PA BGP Peer IP to Azure BGP peer IP. However, BGP session can not be established. It gets stuck in connect state. I have been reseraching Azure VPN with BGP example in the Inernet but I could not find any example. PA BGP is compatble with Azure BGP?

admin@IaaS-AJWS-PA01(active)> ping source 192.168.123.100 host 10.20.254.254
PING 10.20.254.254 (10.20.254.254) from 192.168.123.100 : 56(84) bytes of data.
64 bytes from 10.20.254.254: icmp_seq=1 ttl=127 time=15.3 ms
64 bytes from 10.20.254.254: icmp_seq=2 ttl=127 time=15.1 ms
64 bytes from 10.20.254.254: icmp_seq=3 ttl=127 time=15.3 ms

PA version is 7.1.14

==========
Peer: Azure-East2 (id 16)
virtual router: default
Peer router id: 0.0.0.0
Remote AS: 65515
Peer group: PG-Azure-East2 (id 9)
Peer status: Connect, for 0 seconds
Password set: no
Passive: no
Multi-hop TTL: 5
Remote Address: 10.20.254.254
Local Address: 192.168.123.100
(R) reflector client: not-client
same confederation: no
send aggr confed as-path: yes
peering type: Unspecified
Connect-Retry interval: 15
Open Delay: 0
Idle Hold: 15
Prefix limit: 5000
Holdtime: 0 (config 90)
Keep-Alive interval: 0 (config 30)
Update messages: in 0, out 0
Total messages: in 0, out 1204
Last update age: 152880
Last error:
Flap counts: 4256, established 0 times
(R) ORF entries: 0
Nexthop set to self: no
use 3rd party as next-hop: yes
override nexthop to peer: no
----------
remove private AS number: no
----------

[jperry1]

BGP is BGP and it is compatible. I suggest to trouble shoot it as you would troubleshoot a physical device attempting to establish a BGP peer relationship that is getting stuck in a connect state. 

[ToshiNakano]

We upgareded the PAN from 7.1.14 to 8.0.10. This solved the issue. Now Azure VPN and BGP is working as expected.

[DEBABRATA_TALLY]

HI , 

Can you please share the configuration.