Configuring S2S VPN for Paloalto Deployed in Active/passive azure by using External LB IP

cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring S2S VPN for Paloalto Deployed in Active/passive azure by using External LB IP

L0 Member

 I have deployed Paloalto in HA A/P in Azure i need to establish S2S VPN to Onprem but i dont want to use floating IP because the failover time is very long in production environment ,

can I use External Load Blanacer PIP and Create Load Balancing Rule (UDP 500 , 4500) to establish this VPN instead of floating IP . 

1 REPLY 1

L4 Transporter

The load balancer is typically not an option for VPN termination b/c there is no persistence as the port moves through phases of negotiation.  I typically recommend that you terminate the VPN on the Azure VGW and use our reference architecture method of routing through the firewalls from the gateway subnet.  More information can be found here.

https://www.paloaltonetworks.com/resources/reference-architectures/azure

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!